 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| CT RODU T LETE P TE PRODUC O BS O ITU BST LE SU 5127/883 POSSIB HA2June 2004 (R) HA-5135/883 Precision Operational Amplifier Description The HA-5135/883 is a precision operational amplifier manufactured using a combination of key technological advancements to provide outstanding input characteristics. A high Beta input stage is combined with laser trimming, dielectric isolation, and matching techniques to produce 75V (max) input offset voltage and 0.4V/oC (max) input offset voltage average drift. Other features enhanced by this process include 9nV/Hz (typ) Input Noise Voltage, 4nA Input Bias Current (max) and 120dB Open Loop Gain (min). These features coupled with 106dB CMRR and 94dB PSRR make HA-5135/883 an ideal device for precision D.C. instrumentation amplifiers. Excellent input characteristics in conjunction with 0.6MHz (min) bandwidth and 0.5V/s (min) slew rate, makes this amplifier extremely useful for precision integrator and biomedical amplifier designs. These amplifiers are also well suited for precision data acquisition and for accurate threshold detector applications. Features * This Circuit is Processed in Accordance to MIL-STD883 and is Fully Conformant Under the Provisions of Paragraph 1.2.1. * Low Offset Drift . . . . . . . . . . . . . . . . . . . 0.4V/oC (Max) * Low Offset Voltage. . . . . . . . . . . . . . . . . . . . .75V (Max) * High Gain . . . . . . . . . . . . . . . . . . . . 120dB(1MV/V) (Min) * High CMRR . . . . . . . . . . . . . . . . . . . . . . . . . . 106dB (Min) * High PSRR . . . . . . . . . . . . . . . . . . . . . . . . . . . 94dB (Min) * Low Supply Current. . . . . . . . . . . . . . . . . . 1.7mA (Max) * Low Noise Voltage Density at 1kHz . . . . . 9nV/Hz (Max) * Low Noise Current Density at 1kHz . . . . 0.4pA/Hz (Max) Applications * High Gain Instrumentation * Precision Data Acquisition * Precision Integrators * Biomedical Amplifiers * Precision Threshold Detectors Part # Information PART NUMBER HA2-5135/883 TEMPERATURE RANGE -55oC to +125oC PACKAGE 8 Pin Can Pinout HA-5135/883 (METAL CAN) TOP VIEW BAL1 8 BAL 2 2 1 + 3 4 V- (CASE) 5 7 V+ 6 OUT -IN +IN BAL1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a trademark of Intersil Americas Inc. Copyright (c) Intersil Americas Inc. 2002. All Rights Reserved 1 Spec Number 511016-883 FN3731.3 HA-5135/883 Absolute Maximum Ratings Voltage Between V+ and V- Terminals . . . . . . . . . . . . . . . . . . . . 40V Differential Input Voltage (Note 2). . . . . . . . . . . . . . . . . . . . . . . . . 7V Voltage at Either Input Terminal . . . . . . . . . . . . . . . . . . . . . . V+ to VInput Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25mA Output Current . . . . . . . . . . . . . . . . . . . .Full Short Circuit Protection Junction Temperature (TJ) . . . . . . . . . . . . . . . . . . . . . . . . . . +175oC Storage Temperature Range . . . . . . . . . . . . . . . . . -65oC to +150oC ESD Rating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <2000V Lead Temperature (Soldering 10s) . . . . . . . . . . . . . . . . . . . . +300oC Thermal Information Thermal Resistance JA JC Metal Can Package . . . . . . . . . . . . . . . . . 160oC/W 70oC/W Package Power Dissipation Limit at +75oC for TJ +175oC Metal Can Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 645mW Package Power Dissipation Derating Factor Above +75oC Metal Can Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.5mW/oC CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. NOTE: 1. JA is measured with the component mounted on a low effective thermal conductivity test board in free air. See Tech Brief TB379 for details. Operating Conditions Operating Temperature Range . . . . . . . . . . . . . . . . -55oC to +125oC Operating Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15V VINCM 1/2 (V+ - V-) RL 600 TABLE 1. DC ELECTRICAL PERFORMANCE CHARACTERISTICS Device Tested at: VSUPPLY = 15V, RSOURCE = 50, RLOAD = 100k, VOUT = 0V, Unless Otherwise Specified. GROUP A SUBGROUPS 1 2, 3 Input Bias Current IB VCM = 0V, RS = 10k, 50 +I B + - I B ---------------------------- 2 Input Offset Current IIO VCM = 0V, +RS = 10k, -RS = 10k V+ = +3V, V- = -27V V+ = +27V, V- = -3V VOUT = 0V and +10V, RL = 2k VOUT = 0V and -10V, RL = 2k VCM = +10V, V+ = +5V, V- = -25V, VOUT = -10V VCM = -10V, V+ = +25V, V- = -5V, VOUT = +10V RL = 600 1 2, 3 1 2, 3 1 2, 3 4 5, 6 4 5, 6 1 2, 3 1 2, 3 4 5, 6 -VOUT RL = 600 4 5, 6 Output Current +IOUT -IOUT VOUT = -10V VOUT = +10V 4 4 +25oC +125 oC, LIMITS TEMPERATURE +25oC +125 C, -55 C +25 C +125 C, -55 C o o o o o PARAMETERS Input Offset Voltage SYMBOL VIO CONDITIONS VCM = 0V MIN -75 -130 -4 -6 MAX 75 130 4 6 UNITS V V nA nA 1 2, 3 -4 -5.5 12 12 120 120 120 120 106 106 106 o 4 5.5 -12 -12 -10 -10 -15 nA nA V V V V kV/V kV/V kV/V kV/V dB dB dB dB V V V V mA mA -55oC Common Mode Range +CMR +25oC +125oC, -55oC +25oC +125oC, +25 -55oC -CMR Large Signal Voltage Gain +AVOL oC +125oC, -55oC +25oC +125oC, -55oC -AVOL Common Mode Rejection Ratio +CMRR +25oC +125oC, -55oC +25oC +125 C, -55 C +25oC +125 C, -55 C +25 C +125oC, -55oC +25 C +25 C o o o o o o -CMRR 106 10 10 15 - Output Voltage Swing +VOUT Spec Number 2 511016-883 HA-5135/883 TABLE 1. DC ELECTRICAL PERFORMANCE CHARACTERISTICS (Continued) Device Tested at: VSUPPLY = 15V, RSOURCE = 50, RLOAD = 100k, VOUT = 0V, Unless Otherwise Specified. GROUP A SUBGROUPS 1 2, 3 1 2, 3 1 2, 3 1 2, 3 1 2, 3 -VIOAdj Note 1 1 2, 3 NOTES: 1. Offset adjustment range is [VIO (Measured 1mV] minimum referred to output. This test is for functionality only to assure adjustment through 0V. 2. The input stage has series 500 resistors along with back to back diodes. This provides large differential input voltage protection for a slight increase in noise voltage. LIMITS TEMPERATURE +25oC +125oC, -55oC +25oC +125oC, -55oC MIN -1.7 -1.7 94 94 94 94 VIO-1 o PARAMETERS Quiescent Power Supply Current SYMBOL +ICC CONDITIONS VOUT = 0V, IOUT = 0mA VOUT = 0V, IOUT = 0mA VSUP = 10V, V+ = +5V, V- = -15V, V+ = +15V, V- = -15V VSUP = 10V, V+ = +15V, V- = -5V, V+ = +15V, V- = -15V Note 1 MAX 1.7 1.7 - UNITS mA mA mA mA dB dB dB dB mV mV mV mV -ICC Power Supply Rejection Ratio +PSRR +25oC +125oC, -55oC +25oC +125 oC, -PSRR -55oC Offset Voltage Adjustment +VIOAdj +25oC +125 C, -55 C +25 C +125oC, -55oC o o VIO-1 VIO+1 VIO+1 TABLE 2. AC ELECTRICAL PERFORMANCE CHARACTERISTICS Device Tested at: VSUPPLY = 15V, RSOURCE = 50, RLOAD = 2k, CLOAD = 50pF, AVCL = +1V/V, Unless Otherwise Specified. GROUP A SUBGROUPS 7 7 LIMITS TEMPERATURE +25 C +25oC o PARAMETERS Slew Rate SYMBOL +SR -SR CONDITIONS VOUT = -3V to +3V, VIN S.R. 25V/s VOUT = +3V to -3V, VIN S.R. 25V/s MIN 0.5 0.5 MAX - UNITS V/s V/s TABLE 3. ELECTRICAL PERFORMANCE CHARACTERISTICS Device Characterized at: VSUPPLY = 15V, RLOAD = 2k, CLOAD = 50pF, AV = +1V/V, Unless Otherwise Specified. LIMITS PARAMETERS Average Offset Voltage Drift Differential Input Resistance Average Offset Current Drift Average Bias Current Drift Input Noise Voltage Density SYMBOL VIOTC RIN IIOTC IBTC EN CONDITIONS VCM = 0V VCM = 0V Versus Temperature VCM = 0V Versus Temperature VCM = 0V RS = 20, fO = 1kHz NOTES 1 1 1 1 1 TEMPERATURE -55 C to +125 C +25oC -55oC to +125oC -55oC to +125oC +25oC o o MIN 20 - MAX 1.3 40 40 11 UNITS V/oC M pA/oC pA/oC nV/Hz Spec Number 3 511016-883 HA-5135/883 TABLE 3. ELECTRICAL PERFORMANCE CHARACTERISTICS (Continued) Device Characterized at: VSUPPLY = 15V, RLOAD = 2k, CLOAD = 50pF, AV = +1V/V, Unless Otherwise Specified. LIMITS PARAMETERS Input Noise Current Density Unity Gain Bandwidth Full Power Bandwidth Minimum Closed Loop Stable Gain Output Resistance Power Consumption NOTES: 1. Parameters listed in Table 3 are controlled via design or process parameters and are not directly tested at final production. These parameters are lab characterized upon initial design release, or upon design changes. These parameters are guaranteed by characterization based upon data from multiple production runs which reflect lot to lot and within lot variation. 2. Full Power Bandwidth guarantee based on Slew Rate measurement using FPBW = Slew Rate/(2VPEAK). 3. Power Consumption based upon Quiescent Supply Current test maximum. (No load on outputs.) SYMBOL IN UGBW FPBW CLSG ROUT PC CONDITIONS RS = 2M, fO = 1kHz VOUT = 100mV, fO at -3dB VPEAK = 10V RL = 2k, CL = 50pF Open Loop VOUT = 0V, IOUT = 0mA NOTES 1 1 1, 2 1 1 1, 3 TEMPERATURE +25oC +25oC +25oC -55oC to +125oC MIN 600 8 +1 MAX 0.4 80 51 UNITS pA/Hz kHz kHz V/V mW +25oC -55oC to +125oC TABLE 4. ELECTRICAL TEST REQUIREMENTS MIL-STD-883 TEST REQUIREMENTS Interim Electrical Parameters (Pre Burn-In) Final Electrical Test Parameters Group A Test Requirements Groups C and D Endpoints NOTE: 1. PDA applies to Subgroup 1 only. SUBGROUPS (SEE TABLES 1 AND 2) 1 1 (Note 1), 2, 3, 4, 5, 6, 7 1, 2, 3, 4, 5, 6, 7 1 Spec Number 4 511016-883 HA-5135/883 Die Characteristics DIE DIMENSIONS: 72 x 103 x 19 mils 1 mils 1840 x 2620 x 483m 25.4m METALLIZATION: Type: Al, 1% Cu Thickness: 16kA 2kA GLASSIVATION: Type: Nitride (Si3N4) over Silox (SIO2, 5% Phos.) Silox Thickness: 12kA 2kA Nitride Thickness: 3.5kA 1.5kA WORST CASE CURRENT DENSITY: 6.0 x 104A/cm2 SUBSTRATE POTENTIAL (Powered Up): VTRANSISTOR COUNT: 71 PROCESS: Bipolar Dielectric Isolation Metallization Mask Layout HA-5135/883 BAL1 V+ OUT BAL1 BAL2 -IN +IN V- All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems. Intersil Corporation's quality certifications can be viewed at www.intersil.com/design/quality Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see www.intersil.com Sales Office Headquarters NORTH AMERICA Intersil Corporation 7585 Irvine Center Drive Suite 100 Irvine, CA 92618 TEL: (949) 341-7000 FAX: (949) 341-7123 Intersil Corporation 2401 Palm Bay Rd. Palm Bay, FL 32905 TEL: (321) 724-7000 FAX: (321) 724-7946 EUROPE Intersil Europe Sarl Ave. William Graisse, 3 1006 Lausanne Switzerland TEL: +41 21 6140560 FAX: +41 21 6140579 ASIA Intersil Corporation Unit 1804 18/F Guangdong Water Building 83 Austin Road TST, Kowloon Hong Kong TEL: +852 2723 6339 FAX: +852 2730 1433 Spec Number 5 511016-883 |
Price & Availability of HA2-5135883
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |